Membership

Are you interested? Contact Us and apply for joining us!

Logo

D Logo

Email

Publications

Last Update: 21 September 2016

Journal  Papers

  • R. Ramezani, Y. Sedaghat, and J.A. Clemente, “Reliability Improvement of Hardware Task Graphs via Configuration Early-fetch,” IEEE Trans. on Very Large Scale Integration Systems (TVLSI), Accepted, 2017.
  • R. Ramezani, Y. Sedaghat, M. Naghibzadeh, and J.A. Clemente, “Reliability and Makespan Optimization of Hardware Task Graphs in Partially Reconfigurable Platforms,” IEEE Trans. on Aerospace and Electronic Systems (TAES), Accepted, 2017.

 

Conference Papers

  • R. Ramezani, J.A. Clemente, Y. Sedaghat, and H. Mecha, “Estimation of Hardware Task Reliability on Partially Reconfigurable FPGAs,” Proc. of the Radiation Effects on Components & Systems Conference (RADECS ’16), Bremen, Germany, 19-23 September 2016.
  • R. Shahpasand, Y. Sedaghat, and S. Paydar, “Improving Stateful Robustness Testing of Embedded Real-Time Operating System,” Proc. of the 6th International Conference on Computer and Knowledge Engineering (ICCKE’16), Mashhad, Iran, 20-21 October 2016.
  • J. Yousefi, Y. Sedaghat, and M. Rezaee, “Masking Wrong-successor Control Flow Errors Employing Data Redundancy,” Proc. of the 5th International Conference on Computer and Knowledge Engineering (ICCKE’15), Mashhad, Iran, 28 October 2015.
  • A. Ghavidel, A. Savadi, and Y. Sedaghat, “LTS: Linear Task Scheduling on Multiprocessor Through Equation of the Line,” Proc. of the 18th CSI International Symposium on Computer Architecture & Digital Systems (CADS’15), Tehran, Iran, 7-8 October 2015.
  • N. Rajabpour and Y. Sedaghat, “A hybrid-based error detection technique for PLC-based Industrial Control Systems,” Proc. of  the 20th IEEE International Conference on Emerging Technologies & Factory Automation (ETFA’15), Luxembourg, 8-11 September 2015, pp. 1-7.
  • N. Rajabpour and Y. Sedaghat, “A Software-Based Error Detection Technique for Monitoring the Program Execution of RTUs in SCADA,” Proc. of the 34th International Conference on Computer Safety, Reliability and Security (SAFECOMP’15), Delf, the Netherlands, 22-25 September 2015, pp. 457-470.
  • S.Nokarizi, Y. Sedaghat, and R. Ramezani, “A diskless chekpointing approach for failure recovery in multiprocessor safety-critical embedded systems,” Proc. of the 23rd Iranian Conference on Electrical Engineering (ICEE’15), Tehran, Iran, 10-14 May 2015, pp. 688-693.
  • M.R. Rezaee and Y. Sedaghat, “Improving Error Detection of Software Voters for Safety-Critical Embedded Systems,” Proc. of the 2nd Iranian Conference on Avionics System (ICAS’15), 3-4 February 2015 (In Persian).
  • J. Yousefi and Y. Sedaghat, “Study of Control Flow Checking Techniques for Safety-Critical Embedded Systems,” Proc. of the 2nd Iranian Conference on Avionics System (ICAS’15), 3-4 February 2015 (In Persian).
  • M. Heidari-Iman and Y. Sedaghat, “Introduction and Analysis of Software Fault Injection Tools for Avionics,” Proc. of the 2nd Iranian Conference on Avionics System (ICAS’15), 3-4 February 2015 (In Persian).
  • A. Enayatzare and Y. Sedaghat, “A Super Scheduler Model for Hierarchical Real-Time Systems with Capability of Urgent Tasks Scheduling,” Proc. of the 4th International eConference on Computer and Knowledge Engineering (ICCKE'14), Mashhad, Iran, 29 November 2014, pp. 485-491.
  • R. Ramezani and Y. Sedaghat, “Scheduling Periodic Real-Time Hardware Tasks on Dynamic Partial Reconfigurable Devices Subject to Fault Tolerance,Proc. of the 4th International eConference on Computer and Knowledge Engineering (ICCKE'14), Mashhad, Iran, 29 November 2014, pp. 479-484.
  • M.R. Rezaee, Y. Sedaghat, and M. Khosravi-Farmad, “A Confidence-based Software Voter for Safety-Critical Systems,” Proc. of the 12th IEEE International Conference on Dependable, Autonomic and Secure Computing (DASC'14), Dalian, China, 24-27 August, 2014, pp. 196-201.
  • R. Ramezani and Y. Sedaghat, “An Overview of Fault Tolerance Techniques for Real-Time Operating Systems,” Proc. of the 3rd International Conference on Computer and Knowledge Engineering (ICCKE'13), Mashhad, Iran, 2013, pp. 1-6.

Normal 0 false false false EN-US X-NONE AR-SA MicrosoftInternetExplorer4

  • M.R. Rezaee and Y. Sedaghat, “Improving Error Detection of Software Voters for Safety-Critical Embedded Systems,” Proc. of the 2nd Iranian Conference on Avionics System (ICAS’15), 3-4 February 2015 (In Persian).
  • J. Yousefi and Y. Sedaghat, “Study of Control Flow Checking Techniques for Safety-Critical Embedded Systems,” Proc. of the 2nd Iranian Conference on Avionics System (ICAS’15), 3-4 February 2015 (In Persian).
  • M. Heidari-Iman and Y. Sedaghat, “Introduction and Analysis of Software Fault Injection Tools for Avionics,” Proc. of the 2nd Iranian Conference on Avionics System (ICAS’15), 3-4 February 2015 (In Persian).
  • A. Enayatzare and Y. Sedaghat, “A Super Scheduler Model for Hierarchical Real-Time Systems with Capability of Urgent Tasks Scheduling,” Proc. of the 4th International eConference on Computer and Knowledge Engineering (ICCKE), Mashhad, Iran, 29 November 2014, pp. 485-491.
  • R. Ramezani and Y. Sedaghat, “Scheduling Periodic Real-Time Hardware Tasks on Dynamic Partial Reconfigurable Devices Subject to Fault Tolerance,Proc. of the 4th International eConference on Computer and Knowledge Engineering (ICCKE), Mashhad, Iran, 29 November 2014, pp. 479-484.
  • M.R. Rezaee, Y. Sedaghat, and M. Khosravi-Farmad, “A Confidence-based Software Voter for Safety-Critical Systems,” Proc. of the 12th IEEE International Conference on Dependable, Autonomic and Secure Computing (DASC), Dalian, China, 24-27 August, 2014, pp. 196-201.

R. Ramezani and Y. Sedaghat, “An Overview of Fault Tolerance Techniques for Real-Time Operating Systems,” Proc. of the 3rd International Conference on Computer and Knowledge Engineering (ICCKE 2013), Mashhad, Iran, 2013, pp. 1-6.